ZEISS T-Plan for Aerial Survey Flight Planning. Pre-marking or Postmarking requirement are determined from project requirements.

ZEISS T-Flight Navigation System used for taking aerial photograph. PATB/GPS Block Adjustment used for Aerial Triangulation.

Aerial Photographs are sorted and examined for mapping requirement.

Identify the GCP location in the aerial photographs and selection of minor photo control points.

Establishing the coordinates of the minor control points in the Borneo Rectified Skew Orthomorphic Projection. Block Adjustment with automatic aerial triangulation (Match-AT)

Digital photogrammetric data capturing with Kork Digital mapping System or DTM after the photogrammetric Model is set up in the Stereoplotter.

The digital data was compiled and edited to standard map sheet in metric cadastral sheet format.

The graphic display is a Digital
Photogrammetic Database of Kuching City at a scale of 1:2,500 with an accuracy of one meter on the ground.

Perspective View of a DEM with Grid spacing of 10 meter and a contour layer of 1 meter.

Perspective View of same DEM with Grid spacing of 10 meter and a contour layer of 2.5 meter.

11. Orthophoto Map